Polaris GENERAL 2016 Service Manual page 212

FUEL SYSTEM
4. Gently pull outward on retaining tabs to unlock
retaining clip.
CAUTION
Do not over-pry or excessively bend the retaining tabs.
This can damage the retaining clip, and require
replacement of the fuel line assembly.
5. Push retaining clip upward into the open position.
6. Remove quick connect from the fuel fitting.
4.24
Replacement Needs:
Indicators that the quick connect is damaged, and
assembly replacement is needed:
1. The retaining clip can be closed without the insertion
of a hard line end. The retaining clip is designed to
lock only when a hard line end has been fully
inserted.
2. Retaining tabs are deformed and no longer lock into
the body of the quick connect.
3. Broken retaining tabs, or any sign of cracks in the
retaining clip. The retaining clip is responsible for
holding the quick connect on the line when under fuel
pressure.
4. Quick connect has been twisted from its original
inserted position, or the connector has been
damaged.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.