Gauge Settings Menu; Backlight Color; Clock; Display Units - Polaris GENERAL 2016 Service Manual

ELECTRICAL

GAUGE SETTINGS MENU

Press and release the MODE button to cycle through the
Area 1 modes until the desired default mode displays.
1. Press and hold the MODE button to enter the settings
menu.
2. Press and release either toggle button to cycle to the
desired option.
3. Press MODE to select the option.
4. Press either toggle button to cycle to the desired
setting.
5. Press MODE to save and exit to the settings menu.
6. Press and hold the MODE button to exit the settings
menu.

BACKLIGHT COLOR

The information center backlight can be set to either blue
or red.
1. Press and hold the MODE button to enter the settings
menu.
2. Press either toggle button to cycle to the "BL COLOR"
option. Press MODE to select.
3. Press either toggle button to cycle to the desired
setting.
4. Press MODE to save and exit to the settings menu.
11.34

CLOCK

The clock must be reset any time the battery has been
disconnected or discharged.
1. Press and hold the MODE button to enter the settings
menu.
2. Press either toggle button to cycle to the "CLOCK"
option. Press MODE to select.
3. Press either toggle button to cycle to the desired
setting (12H or 24H). Press MODE to select.
4. Press either toggle button to change each segment of
the clock. Press MODE to accept a change and
advance to the next segment.

DISPLAY UNITS

1. Press and hold the MODE button to enter the settings
menu.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.