Polaris GENERAL 2016 Service Manual page 387

14. Remove the IFP and dump out remaining oil.
15. LSC equipped shocks will require the cap to be
removed with a Torx bit driver. Remove the LSC using
a 5/8" wrench.
16. Remove the DSC using a DSC removal socket.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
STEERING / SUSPENSION
17. Remove the reservoir with a rubber belted strap
wrench.
18. Before putting the body into the clamp blocks,
partially insert an old or used bearing assembly in the
body (This will prevent over tightening and deforming
the body).
19. To assist in breaking the bond with the Loctite®
adhesive, apply heat to the body cap.
8
8.27