Rops Installation - General 4 - Polaris GENERAL 2016 Service Manual

4. Loosely install the fasteners that hold the RH and LH
ROPS to the vehicle frame and rear ROPS.
5. Loosely install the fasteners that hold the front cross
to the RH and LH ROPS. Torque the ROPS fasteners
to specification in order of installation.
TORQUE
Rear ROPS Fasteners:
40 lb-ft (54 Nm)
Side ROPS Fasteners:
40 lb-ft (54 Nm)
Front Cross Fasteners:
40 lb-ft (54 Nm)
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
6. Install the fasteners that hold the visor panel to the
front cross. Torque the fasteners to specification.
TORQUE
Visor Panel Fasteners:
3.5 lb-ft (4.7 Nm)

ROPS INSTALLATION - GENERAL 4

NOTICE
Loosely install ROPS onto vehicle with all fasteners
before beginning to torque fasteners.
1. Loosely install the fasteners that hold the center
ROPS to the vehicle frame.
2. Pull the cargo box handle and lift the cargo box out of
the way.
BODY / FRAME
10
10.71