Eyelet-Mounted Rebound Adjuster - Polaris GENERAL 2016 Service Manual

Table of Contents

STEERING / SUSPENSION

EYELET-MOUNTED REBOUND ADJUSTER

1. Install Dust Plug.

2. Apply Slick Honey® to rebound adjuster.

3. Insert spring.

4. Put the steel ball on the spring with a dab of shock oil.

5. Install rebound knob into eyelet, holding steel ball in

place with fingers. Ensure rebound knob threads into

eyelet correctly, and you can feel the detents click.

Adjust rebound knob to allow metering rod to obtain

maximum travel in eyelet.

7. Install a NEW O-ring on needle and apply thin layer of

Slick Honey.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Table of Contents