Polaris GENERAL 2016 Service Manual page 116

ENGINE / COOLING SYSTEM
7. Install the Clutch Center Distance Tool (PU-50658-A)
e
onto the crankshaft
properly position the clutch center distance. The
pictures below show the tool properly installed
IMPORTANT
Use hole number 4 on the Drive clutch side and hold
number 4 on the Driven Clutch.
3.30
and transmission input shaft to
r
.
8. Loosen the two bolts
bracket to the transmission on the right side.
9. Align the front transmission mounting holes with
transmission joint bracket mounting holes on engine.
10. Install the two bolts
bracket to the engine on the right side. Hand tighten
the bolts so they remain loose at this time.
DO NOT torque fasteners at this time.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
t
retaining transmission joint
y
retaining the transmission joint
NOTICE
© Copyright Polaris Industries Inc.