Polaris GENERAL 2016 Service Manual page 407

4. Insert upper control arm ball joint end into the bearing
carrier. Install upper ball joint pinch bolt
bearing carrier and torque bolt to specification.
TORQUE
Ball Joint Pinch Bolts:
42 lb-ft (57 Nm)
5. Install brake line mounting brackets
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
6. Attach shock to control arm with fastener. Torque
t
into the lower shock bolt to specification.
7. Attach stabilizer link to control arm with fastener.
y
. Torque to specification
Stabilizer Bar Link Fastener:(42 lb-ft (57 Nm))
8. Install NEW ball joint into control arm. Refer to "Ball
Joint Installation"page 8.56 procedure.
STEERING / SUSPENSION
TORQUE
Shock Mount Fasteners:
20 lb-ft (27 Nm) + 90°
TORQUE
8
8.47