Abs Hecu Removal (Intl) - Polaris GENERAL 2016 Service Manual

3. Ensure the sensor is touching the feel gauge and
w
tighten the fasteners .
NOTICE
With the fasteners tightened the feeler gauge should be
able to be inserted and removal with a minimal amount
of force.
4. With the proper air gap attained, torque the fasteners
to specification.
TORQUE
ABS Sensor Mount (INTL):5 lb-ft (7 Nm)
5. Repeat the procedure on the adjacent side of the
gearcase.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.

ABS HECU REMOVAL (INTL)

The ABS HECU can be accessed through the right front
wheel well.
1. Disconnect the ABS HECU electrical connector
2. Disconnect the brake lines
fluid to drain.
NOTICE
Note orientation and location of each brake line for
reassembly.
BRAKE SYSTEM
q
.
w
and allow the brake
9
9.19