Abs Troubleshooting (Intl) - Polaris GENERAL 2016 Service Manual

3. Install brake lines in proper orientation. Torque M12
w
Banjo bolts to specification
TORQUE
ABS HECU M12 Bajo Bolts (INTL):30 lb-ft (41 Nm)
e
4. Torque flare fittings to specification.
TORQUE
ABS HECU Flare Fittings (INTL):15 lb-ft (20 Nm)
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
5. Connect ABS HECU electrical connector
6. Bleed Brake System. See ABS Brake Bleeding / Fluid
Change (INTL)page 9.16

ABS TROUBLESHOOTING (INTL)

• Bent Wheel speed sensor bracket
• Damaged tone ring ( broken / missing teeth)
• Incorrect wheel speed sensor air gap
• Tone ring slid off from its original position
• Faulty HECU
• Faulty brake pressure switch
• Wheels Speed Sensor wire short
• Brake line leak
• Undersized or Oversized Tires
• Faulty wheel speed sensor
• Faulty wheel speed sensor wiring
• Low brake fluid
• Air in brake system
BRAKE SYSTEM
r
.
9
9.21