Stabilizer Bar Removal - Rear - Polaris GENERAL 2016 Service Manual

Table of Contents

STEERING / SUSPENSION

5. Install wheels and torque lugs to specification.

120 lb-ft (163 Nm)

STABILIZER BAR REMOVAL - REAR

1. Lift and support vehicle by main frame.

2. Remove wheels.

3. Identify / mark top side of the stabilizer bar to

reference during installation.

4. Remove the fasteners

to the linkage. Repeat step for opposite side.

5. Mark the location and remove the two stabilizer bar

mounts (if replacing stabilizer bar).

6. Remove the fasteners

mounts / bushings to the vehicle frame.

7. Carefully remove the stabilizer bar from the vehicle.

8. Inspect the stabilizer bar for straightness. Inspect the

pivot bushings and replace if needed.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

retaining the stabilizer bar

Table of Contents