Polaris GENERAL 2016 Service Manual page 388

STEERING / SUSPENSION
20. Use torque cap socket or adjustable wrench to
remove body cap.
CAUTION
Body Cap will be hot.
21. Discard all O-rings and clean Loctite® residue
completely out of threads of the body.
22. Clean body cap using a wire brush and pick.
23. Remove both retaining rings in the body cap using a
sharp pick.
24. Press the bearing out of the body cap using a bearing
press set or assorted sockets.
8.28
25. Prep the threads on the body cap with Loctite®
primer 7649 and set aside.
26. Place shock shaft assembly in clamp blocks and
remove nut from non-BOC equipped shaft assembly.
27. For Bottom Out Cup equipped shocks, remove the
retaining ring from the Bottom Out Post.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.