Polaris GENERAL 2016 Service Manual page 461

5. Install the adjustment set screw and turn clockwise
until stationary pad contacts disc, then back off 1/2
turn (counterclockwise).
6. Verify fluid level in reservoir is up to MAX line inside
reservoir and install reservoir cap.
Master Cylinder Fluid
Up to MAX line inside reservoir
7. Install front wheels.
Installation"page procedure.
NOTICE
If new pads are installed, refer to "Brake Burnishing
Procedure"page 9.36.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
Refer to "Wheel
BRAKE SYSTEM
9
9.41