Driven Clutch Assembly - Polaris GENERAL 2016 Service Manual

10. Separate the stationary sheave from the moveable
a
sheave. Note the X's on the stationary and fixed
sheaves for reassembly.
11. Inspect the clutch bushings for wear. If there is heavy
wear on the bushings, replace the clutch assembly.
12. Inspect the sheaves for excessive wear or damage.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.

DRIVEN CLUTCH ASSEMBLY

q
1. Align the X's on the moveable and stationary
sheaves.
w
2. Install the square sliders
r
3. Install the spring pins to retain the slider pins.
PVT SYSTEM
5
e
and slider pins .
5.29