Planetary Differential Assembly - Polaris GENERAL 2016 Service Manual

Table of Contents

PLANETARY DIFFERENTIAL ASSEMBLY

1. Thoroughly clean the differential components.

2. Assemble the side gears and place them onto the

ring gear along with the six planet gears.

3. Align and install the differential cover using the

previously made scribe marks.

4. Apply Loctite® 2760 to cover screws.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

5. Install screws hand tight. Place assembly in soft jaw

vise and torque to specification.

The are two possible grades for the differential cover

screws. The grade can be located on the head of the

fastener. The two possible fasteners are grade 8.8 and

grade 10.9. Torque the screws according to their

corresponding grade.

Differential Cover Screws (8.8 Fastener):

18–22 lb-ft (24–30 Nm)

Differential Cover Screws (10.9 Fastener):

28 ft-lbs (38 Nm)

TRANSMISSION

Table of Contents