Cam Chain Tensioner Inspection - Polaris GENERAL 2016 Service Manual

MAINTENANCE

CAM CHAIN TENSIONER INSPECTION

1. Locate the cam chain tensioner on the MAG side of
the engine near the starter.
2. Remove the plunger bolt
3. Remove the two tensioner mounting bolts
4. Push on the tensioner lock
plunger in and out. It should move freely. If it does not
move freely, replace the tensioner assembly.
5. Retract the plunger all the way in and install into the
cylinder.
2.20
q
and the spring.
w
.
e
and manually move the
6. Install the two mounting bolts. Torque fasteners to
specification.
TORQUE
Tensioner Mounting Bolts:
7 ft-lb (10 Nm)
7. Install the plunger
specification.
TORQUE
Plunger Bolt:
15 ft-lb (20 Nm)
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
bolt. Torque fastener
© Copyright Polaris Industries Inc.
to