Camshaft Sprocket Inspection - Polaris GENERAL 2016 Service Manual

ENGINE / COOLING SYSTEM
4. Remove the remaining two bolts that retain the front
t
camshaft carrier and carefully lift the carrier off the
camshafts.
y
5. Hold camshafts with an open-end wrench, and
remove the top bolt
i
.
6. Rotate the engine using the flywheel and remove the
remaining bolt from each camshaft sprocket.
7. Lift the chain and sprockets off the camshafts to
allow each sprocket to be removed.
8. Using a paperclip or other tool, hold cam chain up to
keep it from falling down into the crankcase.
NOTICE
The crankcase has a built-in lower guide to prevent the
chain from falling off the crankshaft.
3.36
u
from the camshaft sprockets
9. Evenly loosen the four bolts retaining each rear
a
camshaft carrier and carefully lift the carriers off
the camshafts.
s
10. Mark the intake
ensure proper assembly.
11. Carefully remove camshafts from the cylinder head.

CAMSHAFT SPROCKET INSPECTION

Inspect cam sprocket teeth
Replace timing chain and sprockets if worn or damaged.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
d
and exhaust camshafts to
q
for wear or damage.
© Copyright Polaris Industries Inc.