Steering Shaft Removal - Lower - Polaris GENERAL 2016 Service Manual

Table of Contents

STEERING / SUSPENSION

4. While supporting the power steering unit, remove the

fasteners holding the mount bracket to the vehicle.

5. Carefully remove the power steering unit and mount

bracket from the vehicle as an assembly.

6. If replacing the power steering unit, remove the

fasteners that retain the power steering unit to the

mount bracket.

Electronic Power Assisted Steering (EPAS) units are

programmed to be vehicle specific and are not

interchangeable between product lines.

STEERING SHAFT REMOVAL - LOWER

1. Use the steering wheel to position the front wheels so

they point straight ahead.

2. Locate the lower steering shaft through the left front

wheel well. Mark the lower steering shaft, gear box

stub shaft and gear box to aid installation.

3. Remove the power steering unit . Refer to "Power

Steering Unit Removal"page 8.9 procedure.

4. Remove the pinch bolt retaining the lower steering

shaft to the steering gear box assembly .

5. Lift up on the shaft and remove it through the floor

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Table of Contents