Seat Belt Switch - Polaris GENERAL 2016 Service Manual

2. Disconnect the transmission switch harness by lifting
the connector lock and pulling on the connector. Do
not pull on the wiring.
3. Test the transmission switch continuity readings for
each gear position and compare to the specification
table below.
RESISTANCE VALUE
GEAR
WHEN MEASURED AT SWITCH
POSITION
TERMINALS A AND B
HIGH
LOW
NEU
REV
PARK

SEAT BELT SWITCH

NOTICE
If the circuit is open (buckle undone) vehicle speed will
be limited to 15 mph. If the circuit is closed (buckle
inserted), the vehicle will function normally.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
TESTING
1. Disconnect the harness
620 Ω
300 Ω
160 Ω
75 Ω
24 Ω
2. Using a multi-meter, measure between both pins on
q
running to the driver's seat
belt latch.
switch.
SEAT BELT
SEAT BELT ENGAGED
DISENGAGED
457 kΩ
ELECTRICAL
187 kΩ
11
11.87