Interior Body Component Removal; Interior Body Component Removal - General 4 - Polaris GENERAL 2016 Service Manual

Table of Contents

BODY / FRAME

INTERIOR BODY COMPONENT REMOVAL -

ROPS shown removed for illustration purposes only. It

is not necessary to remove the ROPS to remove the

interior body components.

1. Remove the hood, front and rear fenders, and rocker

panels. Refer to "Exterior Body Component

Removal"page 10.26 procedure.

2. Remove the fasteners holding the upper dash panel

to the vehiclė and remove the panel.

3. Remove the fasteners holding the upper floor panel to

the main floor panels.

4. Pull the controls console panel from the main dash

components in the controls console panel.

5. Remove the remaining fasteners in the glovebox,

behind the controls console panel, and behind the

speedometer display holding the main dash to the

vehicle. Disconnect the rest of the interior controls

from the wire harness and remove the main dash

from the vehicle.

Remove the gauge cluster, if necessary, to aid in

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Table of Contents