Polaris GENERAL 2016 Service Manual page 260

PVT SYSTEM
5. Install the spring so the arm
the moveable sheave.
o
6. Align the X's on the spider and moveable sheave.
7. Install the universal clutch compressor on the clutch
and compress the helix cover.
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
5.34
i
rests into the notch in 8. Align the marks previously made on the helix cover
and moveable sheave. Install the helix/cover and the
a
four fasteners . Torque fasteners to specification.
TORQUE
Helix Retaining Screws:
48 in-lb (5 Nm)
9. Once back together, verify the grease / tape marks
made during disassembly are properly aligned.
10. Install the drive clutch on the vehicle. See PVT
Assemblypage
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.