Eyelet-Mounted Rebound Adjuster - Polaris GENERAL 2016 Service Manual

Table of Contents

39. Apply heat with a propane torch to the bottom of

shock eyelet.

40. Remove eyelet using an adjustable wrench or Body

Eyelet will be Hot.

41. Remove Loctite® residue out from threads of the

eyelet and shock shaft.

EYELET-MOUNTED REBOUND ADJUSTER

1. For shocks with , remove Jet/Check Valve with Hex T-

handle wrench.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

STEERING / SUSPENSION

2. Push needle out of shock shaft using a metering rod

and Hex T-handle wrench.

3. Remove O-ring from needle.

4. Back out rebound adjuster with flat head screw driver,

but do NOT fully remove rebound adjuster yet.

Table of Contents