Battery Conductance Analyzer - Polaris GENERAL 2016 Service Manual

Table of Contents

If the regulator / rectifier case temperature exceeds

230° F or 110° C, the unit will turn itself off to cool down.

The unit will turn on again after it has cooled down to at

least 212° F or 100° C. If it turns off, verify the cooling

fins are clean, free from debris and that adequate

airflow is present.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

BATTERY CONDUCTANCE ANALYZER

Conductance describes the ability of a battery to conduct

current. A conductance tester functions by sending a low

frequency AC signal through the battery and a portion of

the current response is captured, from this output a

conductance measurement is calculated. Conductance

testing is more accurate than voltage, specific gravity, or

load testing.

Authorized Polaris dealers/distributors are required to

use the conductance analyzer when testing 12V Polaris

Polaris MDX-610P

Table of Contents