Polaris GENERAL 2016 Service Manual page 296

TRANSMISSION
13. Slowly rotate the snorkel tube clockwise while
counting the number of notches passing through the
hole opening as you rotate the tube. Rotate the
snorkel tube to the 3rd notch from the 'zero'
backlash position obtained in step 11.
14. Check the pinion shaft gear backlash again by feel. If
the pinion shaft gear lash appears to be too tight,
rotate the snorkel shaft clockwise to the next notch
(4th notch).
15. Once the backlash is set, apply Loctite
threads and install the locking screw to secure the
snorkel tube.
6.34
16. Torque the locking screw to specification.
® 242 to the
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
TORQUE
Snorkel Locking Screw:
8–10 lb-ft (11–14 Nm)
© Copyright Polaris Industries Inc.