Shock Disassembly (Walker Evans) - Polaris GENERAL 2016 Service Manual

STEERING / SUSPENSION
44. Ensure rebound and compression adjuster are fully
functioning by hand actuating the shock absorber.
NOTICE
Check for any leaks or faults in the shock absorber's
functionality.
45. Tap body cap into position.

SHOCK DISASSEMBLY (WALKER EVANS)

1. Insert needle into charge port to release the nitrogen
charge.
2. Remove the wiper cap.
8.42
3. With needle still in bleeder valve press seal case
down as far as possible.
4. Remove needle from charge port.
5. Remove the wire ring.
6. Remove bleed screw from the seal head.
7. Remove the shaft assembly.
8. Dump all oil from the shock and let drain.
9. Remove the piston lock nut from shaft.
10. Remove the piston and valve stack from shaft stem.
11. Remove the seal case and wiper cap from shaft.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.