Purge Valve Replacement; Purge Valve Ohm Test - Polaris GENERAL 2016 Service Manual

FUEL SYSTEM
7. Reinstall rear lower close off panel and center
council. Reference page 10.43
8. Reinstall seats. See page 10.56.

PURGE VALVE REPLACEMENT

NOTICE
2019 models only.
1. Remove seats. See page 10.25.
2. Remove center council and rear lower close off panel
by referencing page 10.35
3. Remove lines connected to purge valve
4. Disconnect purge valve electrical connector
5. Remove purge valve from the bracket.
6. Install new purge valve onto its bracket.
7. Installation is performed by reversing the removal
procedure.
8. Reinstall rear lower close off panel and center
council. Reference page 10.43
9. Reinstall seats. See page 10.56.
4.10

PURGE VALVE OHM TEST

Use a multimeter to test the resistance of purge valve
as shown.
q
.
Compare the with the value above and replace if not
within specification.
w
.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
Specification
17 ± 2 Ω
© Copyright Polaris Industries Inc.
q