4. Remove low friction seal pack from bearing
assembly.
5. Remove U-Cup seal from bearing assembly. Note the
direction seal was installed for assembly.
6. Remove external O-ring from bearing assembly.
NOTICE
If internal bearing is damaged, replace with complete
bearing assembly.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
STEERING / SUSPENSION
SHOCK ASSEMBLY (FOX)
1. Install one retaining ring in the eyelet.
2. Press bearing into the eyelet using Bearing Press or
proper sized socket.
3. Install second retaining ring.
8
8.33