Polaris GENERAL 2016 Service Manual page 320

Table of Contents

8. Slide the rear propshaft forward to remove it from the

transmission output shaft.

9. Lift the support bearing and propshaft upward and

push towards rear of the vehicle until it clears its

If necessary, separate the support bearing to gain

The rear of the propshaft must be angled and guided

backwards to aid in clearing the mount.

10. Angle the front of the propshaft and support bearing

downward and move toward the front of the vehicle to

Use care not to damage brake lines when removing

11. With the propshafts removed from the vehicle,

inspect the shaft for cracks, damage from debris, and

straightness.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Chapters

Table of Contents