Interior Body Component Installation; Interior Body Component Installation - General 4 - Polaris GENERAL 2016 Service Manual

BODY / FRAME
15. Install the fasteners holding the upper dash panel to
the vehicle.
16. Install the hood, front and rear fenders, and rocker
panels. Refer to "Exterior Body Component
Installation"page 10.50 procedure.
10.46
INTERIOR BODY COMPONENT
INSTALLATION - GENERAL 4
NOTICE
ROPS shown removed for illustration purposes only. It
is not necessary to remove the ROPS to remove the
interior body components.
1. Install the RH and LH main floors in the vehicle and
install the fasteners holding the main floors to the
vehicle. Torque the fasteners to specification.
TORQUE
Floor Fasteners:
3.5 lb-ft (4.7 Nm)
2. Install the brake pedal, accelerator pedal, and
mounting bracket.
Installation"page 9.38 procedure.
3. Install the rear RH and LH floors in the vehicle and
install the fasteners holding the main floors to the
vehicle. Torque the fasteners to specification.
TORQUE
Floor Fasteners:
3.5 lb-ft (4.7 Nm)
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
Refer to "Brake Pedal
© Copyright Polaris Industries Inc.