Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 168

11
Troubleshooting
11-34
On the MoCon toolbar, click the M button.
5
On the Motor tab, make sure both Motor 0, Controller 0 and
a
Motor 1, Controller 0 appear in the Object List. Click OK.
In the Motor Summary window, select the Config tab.
b
Select the Reversed option for Encoder Phase as shown
below.
Select the Enabled option for Amp Enable, for both the X
c
and Y axes. Amp Enable in the bottom pane should show
Enabled for both axes.
Agilent U1840A Medalist sj5000 Hardware Manual