Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 114

9
Downloading PLC Programs
Downloading Using the Serial Cable
9-4
The RS232 cable is supplied with the sj5000. The download
procedure is as follows:
1
Connect the RS232C cable between the PC (COM port 1) and
port 1 on the PLC.
2
On the control panel move PLC dip switch 4 on. (This sets the
PLC serial communications protocol to Auto.)
3
Launch CX-Programmer version 6.1.
Click File > Open to open c:\cpi\data\PLC\sj5000.cxt.
4
In the left pane, right-click NewPLC1(CP1H) Offline.
5
6
In the Change PLC dialog box, set the following:
Select CP1H for Device Type and click Settings. Then in the
d
Device Type Settings dialog box, select X for CPU Type
and click OK.
Select Toolbus for Network Type.
e
Click OK.
f
Click PLC > Online.
7
Agilent U1840A Medalist sj5000 Hardware Manual