Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 119

Download Barcode Reader Setup File
Agilent U1840A Medalist sj5000 Hardware Manual
Upon successful installation, all connected barcode readers
will appear in the Windows Device Manger as new COM ports
in the Ports category. In the following example, the MS-4
barcode reader appears as COM7.
4
Note down the COM port number of each barcode reader
connected to the sj5000.
Use the Microscan ESP software to download the standard
setup file into the MS-4 barcode reader. Make sure the MS-4
barcode reader is already connected to the USB port.
1
Launch the Microscan ESP software.
Select the barcode reader model (MS-4) and click OK.
2
Setting Up Barcode Readers
10
10-3