Installing The Keyboard And Monitor - Agilent Technologies U1840A Medalist sj5000 Hardware Manual

3
Installation

Installing the Keyboard and Monitor

3-8
1
Remove the four mounting screws at the front left of the
machine below the switch plate.
2
Align the monitor/keyboard mount arm with the mounting
plate on the machine and tighten the screws.
3
Place the mounting pole through the keyboard tray mount
clamp and then into the monitor/keyboard mount arm.
4
Tighten the keyboard tray in place.
5
Secure the mounting pole by tightening the screw in front of
the mount arm.
6
Remove the four inner screws from the back of the monitor.
Align the holes with the monitor mounting plate, then insert
and tighten the four screws.
7
Place the keyboard and mouse on the keyboard tray.
Mounting
pole
Monitor
mount
Keyboard
mount
Monitor/
keyboard
mount arm
Agilent U1840A Medalist sj5000 Hardware Manual