Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 108

8
Camera and Lighting Controller Testing
N O T E
8-8
Keep clicking the Level button at the bottom right, until
13
Level 3 appears.
The camera must be in acquisition mode for the different lighting rings to
be triggered on and off.
14
Perform the following checks:
Click this: Check that feedback shows this:
90 Ring 01FF@F*
The red 90 degree ring in the lighting head should turn on.
70 Ring 02FF@0*
The red 70 degree ring should turn on and the 90 degree ring
turn off.
60 Ring 04FF@2*
The red 60 degree ring should turn on and the 70 degree ring
turn off.
45a Ring 40FF@2*
The red 45a degree ring should turn on and the 60 degree ring
turn off.
45b Ring 20FF@0*
The green 45b degree ring should turn on and the 45a degree
ring turn off.
Agilent U1840A Medalist sj5000 Hardware Manual