Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 111

Agilent U1840A Medalist sj5000 Automated Optical Inspection System
Hardware Manual
9
Downloading PLC Programs
Downloading Using a USB Cable 9-2
Downloading Using the Serial Cable 9-4
Selecting Dual or Single Lane Operation 9-6
This chapter describes the procedure for downloading PLC
programs from a PC to the Medalist sj5000. The procedure
applies to both the sj5000 Single Lane and sj5000 Dual Lane.
Both systems use the Omron CP1H X40DT1-D PLC. This PLC is
programmed using the Omron CX-Programmer Version 6.1.
The PLC programs can be downloaded using either a USB cable
or serial cable (supplied with the sj5000) between the PC and
the PLC. Downloading with a USB cable will be faster.
Agilent Technologies
9-1