Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 130

10
Setting Up Barcode Readers
10-14
From the Tools menu, click the Barcodes folder.
15
16
Ensure that the settings are as follows:
Serial Port 4
Baud Rate 9600
Byte Size 8
Parity None
Stop Bits 1
Click the Machine Specific tab and select the options shown
17
below.
Click the Reader Specific tab and click Read.
18
a
Use the master barcode reader to scan a barcode.
b
Use the slave barcode reader to scan a barcode. The
barcode text should be displayed with a 01 prefix.
19
Place a board in the sj5000.
20
Scan a barcode with the master barcode reader.
The barcode text should be displayed with a 00 prefix.
21
Do the same with the slave barcode reader.
The barcode text should be displayed with a 01 prefix.
Agilent U1840A Medalist sj5000 Hardware Manual