Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 20

1
Safety and Regulatory Information
The C-tick mark is a registered trademark of the Spectrum Management Agency of Australia. This
signifies compliance with the Australia EMC Framework regulations under the terms of the Radio
Communication Act of 1992.
This text indicates that the ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
This instrument complies with the WEEE Directive (2002/96/EC) marking requirement. This
affixed product label indicates that you must not discard this electrical/electronic product in
domestic household waste.
Electrostatic Discharge (ESD) Precautions
ESD Symbol
1-14
Static electricity is destructive to your production process and
the Agilent U1840A Medalist sj5000. Careless handling and poor
site planning can cause system reliability problems and reduce
your product yield. The system may not be as easily damaged as
the modules you will be testing, but good anti-static planning
will help ensure high reliability.
The ESD symbol below indicates areas where ESD caution must
be exercised. This is to prevent damage to instruments and/or
test disruption.
Caution: Static Sensitive.
Electrostatic discharge in this area may cause equipment damage or test
disruption.
Agilent U1840A Medalist sj5000 Hardware Manual