Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 43

N O T E
WA RNING
WA RNING
Agilent U1840A Medalist sj5000 Hardware Manual
12
Remove the shipping clamps before operating the gantry.
These steps must be followed every time the machine is lifted, regardless
of whether it is moved from its location.
If the machine is being used outside of the production line, a
conveyor must be fitted both upstream and downstream for safety
reasons.
The machine must never be raised, lowered, or moved while
electrical power is connected.
3
Installation
3-5