Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 123

Align Barcode Reader
Agilent U1840A Medalist sj5000 Hardware Manual
The barcode reader has to be properly aligned physically to
ensure that it captures good legible images from the target. This
can be done by using the Microscan ESP software which
provides a real-time visual environment for barcode alignment.
1
Load a board with a barcode in the desired location for
barcode detection.
2
Launch the Microscan ESP software and go into Camera
mode by clicking Camera.
Click Test.
3
The barcode reader will take a continuous shot and decode
the barcode.
4
Adjust the barcode reader until it achieves a good reading
(Percent Decode > 90%).
Fix the barcode reader position and click Stop to finish the
5
test.
Setting Up Barcode Readers
10
10-7