Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 164

11
Troubleshooting
11-30
from the Object Pool and click Add to add them to the list.
Click OK.
The following window appears:
b
Open the front access door. If the encoders on both axes
are reading correctly then the following should happen:
• As the X axis (Axis 0 in MoCon) is moved away from the
front of the system, the numbers highlighted above should
decrease.
• As the X axis is moved toward the front of the system, the
numbers highlighted above should increase.
• As the Y axis (Axis 1 in MoCon) is moved to the right, the
numbers highlighted above should decrease.
Agilent U1840A Medalist sj5000 Hardware Manual