Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 125

Agilent U1840A Medalist sj5000 Hardware Manual
2
Add each barcode reader's COM port to the Serial Port list as
follows: click the + button, select the COM port, and click OK.
3
If it is necessary to configure the Read Trigger string, type it
in the Read Trigger field. For the Microscan USB barcode
readers, the default string is
If you need to remove a COM port, select it from the Serial Port
list and click the – button.
Setting Up Barcode Readers
.
<+>
10
10-9