Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 162

11
Troubleshooting
11-28
Move the Axis
Make sure the hardware has been checked and present, and the
parameters downloaded before continuing.
Launch MoCon for the following procedures. On the toolbar of
the MoCon window, the following buttons will be used:
C - Controller Summary
S
- Motion Supervisor Summary
F - Filter Summary
A - Axis Summary
M - Motor Summary
Click the M button on the toolbar.
1
a
On the Controller tab of the configuration window, click
Controller 0 and click OK.
Agilent U1840A Medalist sj5000 Hardware Manual