Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 59

Manual Width Adjust
Agilent U1840A Medalist sj5000 Hardware Manual
You can manually adjust the distance between the conveyor
rails using the AWA buttons on the switch plate at the front of
the sj5000.
Figure 5-2 AWA IN/OUT buttons on the switch plate
1
Ensure there are no boards in the sj5000.
2
Ensure the E-Stop circuit has been reset.
3
To narrow the distance between the rails, press the top white
button (AWA OUT). Hold the button for at least one second to
activate the movement.
4
To widen the distance between the rails, press the bottom
black button (AWA OUT). Hold the button for at least one
second to activate the movement.
When finished, press the PLC RESET button.
5
Changing the Conveyor Rail Width
5
5-3