Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 98

7
Camera and Lighting Calibration
Lighting Calibration Files
Table 7-2 Lighting calibration files
File name
CalibratedLightingValues.xml
AutoCalibrationResults.log
Lighting Ring Image over Grey Area
Lighting Controller Log
LightingConfigurationValues.xml
7-16
Table 7-2 lists the files that are required to perform lighting
automatic calibration.
Description
Contains the target means that were achieved after lighting automatic
calibration took place and displays the same values that were displayed in the
Targets Achieved column in the Lighting Controller window.
Located in C:\cpi\data.
Contains lighting auto-calibration results and other useful information such as
current outputs sent to the lighting rings.
Located in C:\cpi\log.
During calibration, an image is taken of each lighting ring over the gray card
area. These images are saved in the format 'BBxx.pgm' where xx indicates the
lighting ring. For example, BB45R.pgm.
Located in C:\cpi\img.
After calibration has been performed, and if you confirm that changes will be
saved, the list of currents for each ring before and after calibration is saved to
this file.
Located in C:\cpi\log.
Contains all configuration information pertaining to lighting.
Agilent U1840A Medalist sj5000 Hardware Manual