3
Installation
Connecting the Mains Cable
WA RNING
3-10
The mains connection should only be done by qualified personnel.
The mains cable uses US or EU color coding depending on the
option purchased and no connector is provided. The connector
to be used will depend on the requirements of the factory in
which the sj5000 is being installed.
1
Route the mains cable from the mains isolator following the
cleats provided.
Mains cable
2
Feed the cable through the slot in the base of the machine.
Mains
cable
3
Install the connector and plug it into the factory mains
supply.
Agilent U1840A Medalist sj5000 Hardware Manual