Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 157

Agilent U1840A Medalist sj5000 Hardware Manual
12
At the back of the PC, look at the first drive on the left, Axis 0
or X Axis. Make sure that a SyncNet cable (p/n 5186-4710) is
connected to the top LAN-type connector in C4 as shown
below. The bottom SyncNet cable should be connected to the
top connector in C4 on the drive 2 Axis 1 or Y Axis.
13
An easy way to find faults on the SyncNet cabling is by
looking at the lights. There should be an amber light at the
top and a green light at the bottom of each connector as
shown above.
14
When all the hardware has been checked and found to be
working correctly, check the software.
11
Troubleshooting
11-23