Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 47

Agilent U1840A Medalist sj5000 Hardware Manual
Next, connect the cables for the monitor, keyboard, and mouse.
1
Connect the monitor power cable and monitor signal cable to
the monitor and secure them in place with the cable ties
provided.
Do not secure the cables too tightly. Ensure there is enough
slack so that the monitor/keyboard arm can be adjusted
without straining the cables.
2
Feed the monitor power, monitor signal, mouse, keyboard,
and keyboard earth cables along the mount arm to the inside
of the system.
3
Open the front access door and connect the cables to the
corresponding cables inside the machine.
3
Installation
3-9