Adjusting The Height And Leveling The Sj5000 - Agilent Technologies U1840A Medalist sj5000 Hardware Manual

3
Installation

Adjusting the Height and Leveling the sj5000

3-6
Adjusting the Height
The four adjustable feet are used to vary the height of the
sj5000. As described in
adjusted so that the system conveyor height matches that of the
input and output conveyors.
Leveling the sj5000
After adjusting the height, level the machine as follows:
1
Loosen the feet locking nuts.
2
Place the level gauge on the X rail and adjust the feet until
the machine is level.
3
Do the same way for the Y rail.
4
Ensure the final height is same as the input and output
conveyors.
5
Once the correct level has been achieved, tighten the feet
locking nuts.
"Moving the sj5000", the height must be
Agilent U1840A Medalist sj5000 Hardware Manual