Agilent Technologies U1840A Medalist sj5000 Hardware Manual page 110

8
Camera and Lighting Controller Testing
8-10
Click this: Check that feedback shows this:
45a_d S7 7840@3*
45a_d S8 7880@7*
The Terminal window should now show the following:
Click Level 4 which returns you to the level 1 window.
17
Click off and check that the feedback reads 0000@0*.
18
At this point none of the LEDs should be on. The lighting
controller is now fully tested.
19
Close the Terminal window. When prompted to save changes
to the terminal settings, click No.
Agilent U1840A Medalist sj5000 Hardware Manual