Huawei USG9500 Series Hardware Manual page 504

Hide thumbs Also See for USG9500 Series:
Table of Contents

Advertisement

HUAWEI USG9500 Series
Hardware Guide
Content
MN-Z
Fill out the labels for network cables connecting hubs and routers or agents and the network
cables for other purposes according to actual connections:
l
l
l
The serial number on the hub, the network interface number of the agent or terminal, and the
location of the stand-alone router should be specified according to actual connections.
Label Example
Figure A-85
Figure A-85 Example of the label on network cables
A01
The labels in
l
l
Issue 03 (2017-12-15)
Meaning
MN: cabinet
number
Z: Location
number
For the network cable connecting a hub and router, the label on the hub end should
specify the numbers of the chassis and cabinet where the hub resides as well as the serial
number on the hub. The label on the router end should indicate the number of the chassis
and cabinet where the router locates. If the router is stand-alone, provide the specific
position of the router.
For the network cable connecting a hub and an agent or a terminal, the label on the agent
or terminal end should specify the serial number of the network interface. The definitions
of the cabinet number and chassis number are the same as those described in Table D-4.
For a stand-alone hub without any cabinet or chassis, the label should specify the precise
location of the hub.
shows an example network cable label.
03
01
01
Figure A-85
are described as follows:
"A01-03-01-01" indicates that one end of the network cable is connected to network
interface 01 of slot 01, chassis 03 of the cabinet in row A, column 01 in the equipment
room.
"B02-03-01" indicates that another end of the network cable is connected to network
interface 01, chassis 03 of the cabinet in row B, column 02 in the equipment room. There
is no slot number.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Example
B02 is the second cabinet in Row B.
Fill in the valid location number of the terminal
device on site. If the cable is connected to a router
in a cabinet, specify the serial numbers of the
cabinet, the chassis, and the Ethernet interface of
the router, for example, B02-03-12. If the cable is
connected to the Network Management Station
(NMS), specify the location of the NMS.
A Appendix
492

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usg9520Usg9560Usg9580V300r001V500r001

Table of Contents