Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Panel
Figure 1-86
Figure 1-86 E8KE-X-101-5X10GE-SFP+
Name
STATUS (green)
L/A (green)
Interface Attributes
Table 1-98
Table 1-98 E8KE-X-101-5X10GE-SFP+ interface attributes
Attribute
Connector type
Optical interface attribute
Working mode
Issue 03 (2017-12-15)
shows the E8KE-X-101-5X10GE-SFP+.
E8KE-X-101-5X10GE-SFP+
lists the attributes of interfaces on the E8KE-X-101-5X10GE-SFP+.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l Blinks every 2 seconds (0.5 Hz): The system is working
properly.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
Description
LC/PC
Compliant with the selected SFP+ optical module.
For details about the optional attributes of the optical module,
see:
l
1.5.1 1 Gbit/s Electrical Transceiver
l
1.5.2 1.25 Gbit/s SFP/eSFP Optical Module
l
1.5.4 10 Gbit/s SFP+ Optical Module
NOTICE
The optical interface of the 10GBase LAN/WAN-SFP+ FPIC
supports
1.5.1 1 Gbit/s Electrical Transceiver
Gbit/s SFP/eSFP Optical Module
versions. To use
1.5.1 1 Gbit/s Electrical Transceiver
1.25 Gbit/s SFP/eSFP Optical Module
need to upgrade the software version.
Full-duplex
1 Hardware Overview
and
1.5.2 1.25
in V500R001C60 and later
and
1.5.2
in earlier versions, you
161
Advertisement
Table of Contents
